How To Make Windows 7 See 3tb Hard Drive

Seagate 3TB hard bulldoze not showing full chapters

"There is something incorrect with my Seagate 3TB external hard drive which was bought a few days ago. The hard drive does not showing the full chapters in my Windows 7. I understand that there are different adding methods for Windows operating arrangement and hard bulldoze manufactures. But the deviation should not exist that much. Only put, my 3TB HDD only showing 2TB and I cannot make utilise of the left 952GB unallocated space. Is there whatever way to restore the HDD to full capacity?"

Many a user find that their hard drive, specially external hard drive, USB hard drive, or portable hard drive does not showing total size when they use it. Unremarkably, these types of hard drives are bigger than 2TB in size. In a few cases, 500GB or 1TB hard bulldoze will not showing full chapters.

Apart from Seagate external hard drive, WD external hard drive, Hitachi difficult drive, even Samsung difficult drive does not escape such bad luck. It seems like missing space on the hard drive. Then, what are the possible causes for 3TB external HDD not showing full chapters?

Why does 3TB HDD not show full capacity?

When information technology comes to hard drive not showing full size, post-obit reasons can account for the problem.

• The 3TB hard drive has been initialized to a wrong partition table. If you lot find a formatted difficult drive not showing full capacity, which is mainly because you lot format the 3TB hard bulldoze to MBR partition table. As we all know, MBR partition table cannot accost to the infinite that exceeds 2TB. Every bit a result, to use a full chapters of a hard drive that is larger than 2TB, you demand to initialize it to GPT partition tabular array (see MBR vs GPT). That is the exact solution for the user in the example who uses Seagate external hard drive.

• The 3TB external hard bulldoze does non connect correctly. Some portable difficult bulldoze and USB difficult drive are designed to connect a PC via a USB port. If you install the USB difficult bulldoze to your computer, the hard drive capacity detecting may go an outcome. An accepted explanation is the controller board of USB hard drive breaks the 2TB limitation, yet Windows internal device controller does non. Therefore, you need to boosted hardware to make the installed USB/portable difficult drive showing full chapters. In that case, all y'all need to exercise is connecting the 3TB USB hard drive via USB port.

Other than those ii main reasons, figurer virus and hidden recovery division are likewise possible causes for 3TB HDD not showing full capacity. Surely, they are as well possible reasons for 4TB drive not showing full capacity. Withal, what count next is to notice out how to solve this type of issues.

How to fix 3TB hard drive showing wrong capacity appropriately?

Y'all need dissimilar solutions for the problem in different situations. Permit'due south get to know them one by one.

Catechumen 3TB HDD to GPT

If y'all initialized the 3TB to a incorrect partition scheme when y'all first use it in Windows, don't worry. Windows offers the option to change the partition scheme to the right one.

• Method A. Convert to GPT disk in Deejay Management

This method applies to new hard bulldoze not showing total capacity issue. The option just works on an empty disk. If in that location is a partition on the disk, the Convert to GPT Disk will grayed out.

1. Click on Start, correct click Estimator (orThis PC) and select Manage. Click Deejay Direction in the left side.

ii. Right click the 3TB HDD and select Convert to GPT Disk.

• Method B. Convert 3TB drive to GPT via Diskpart

This method applies to big capacity hard drive that has partitions formatted or files stored. Information technology will outset clean all data on the disk and then convert it to GPT. Therefore, backup important files if necessary.

one. Press Win + R to elevator Run. Type diskpart and press OK. Run as administrator.

2. Input these commands in sequence and each command has an Enter followed by.

• listing deejay

• select deejay n (where n is the disk number of the 3TB hard drive)

• clean

• convert gpt

• exit

Become dorsum to Deejay Management and you should be able to use a full 3TB difficult bulldoze there.

• Method C. Convert 3TB external to GPT without data loss

This method applies to 3TB external hard drive in whatever status because it won't delete existing partitions and files. In the first place, you need to download the gratuitous division manager, AOMEI Sectionalization Assistant Standard.

1. Install and run AOMEI Partition Assistant. Right click the 3TB HDD disk and selectConvert to GPT Disk.

two. Confirm the operation by clicking OK.

3. Click Apply and so Go on to commit the awaiting functioning.

Tips: to convert system deejay from MBR to GPT without information loss, please refer to AOMEI Sectionalisation Assistant Professional edition.

Wipe 3TB external HDD thoroughly

If the 3TB bulldoze not showing full capacity problem does not issue from wrong partition table, it could be the problem of estimator virus or subconscious recovery division. As for hidden recovery partition, you tin can use the feature Change Drive Letter and Paths in Disk Management to brand it visible.

As to the computer virus, it is suggested to make clean the external drive. You can refer to steps in Method B to make clean the 3TB disk in Diskpart, or you can wipe the 3TB disk completely and permanently with aforementioned free AOMEI Partition Assistant.

ane. Open AOMEI Partition Assistant. Correct click the 3TB hard drive and select Wipe Difficult Drive.

2. Choose Fill Sectors with Zero and click OK.

3. Besides, click Apply and Proceed to execute the pending functioning.

Tips: if you desire to wipe all data on an SSD, upgrade toProfessional version and please refer to SSD data wiping with some other feature, since HDD and SSD has different inner structure.

3TB hard drive only showing 746GB in Windows vii

When you become 3TB hard drive shows 746GB unallocated space in Disk Management, it could be the problem of incorrectly configured system settings, irregular entries in Registry, or Intel® Rapid Storage Engineering (Intel RST).

You can easily set up the registry and correctly configure the organization settings with the assistance of Reimage Repair Tool if that is the cure. For more information about the steps of using that tool with screenshots, delight refer to 3TB external suddenly becomes 746GB.

Another possible caption is that you are using Intel RST version of 10.0.0.1046. This type of Intel RST makes Windows operating system ignores the near 2.2TB of raw chapters of the 3TB HDD. Therefore, Deejay Direction merely recognizes the left 746GB disk infinite. To fix the consequence on 3TB HDD, you lot need to upgrade Intel RST to x.1 or newer version. So, you may be able to use the total size.

Verdict

When you find 3TB HDD not showing full capacity in Windows 7 or Windows 10, don't be panic. Obtain the corresponding fixes for your effect. Besides, AOMEI Division Assistant is also a proficient assist in solving unallocated infinite on 4TB hard drive outcome.

Source: https://www.diskpart.com/articles/3tb-hdd-not-showing-full-capacity-3889.html#:~:text=Click%20on%20Start%2C%20right%20click,select%20Convert%20to%20GPT%20Disk.

Posted by: reedthowite1944.blogspot.com

Share this post