How To Install Windows 95

Download Commodity

Download Article

Did you know that you tin can still install Windows 95 on a PC? If you tin can become your hand on a Windows 95 installation deejay, check out our guide on installing this vintage version of Windows on your reckoner.

1

Insert the Windows 95 installation disk.
2

Kicking up your reckoner.

1

Wait for the screen bulletin to appear. When this screen appears, press ↵ Enter .
ii

Configure. If yous haven't already allocated a segmentation to your hard bulldoze, brand certain 'Configure unallocated disk space' is highlighted and ↵ Enter .
iii
Select whether y'all would like large disk back up.
- This is a affair of personal preference but 'Yes' was chosen in this tutorial.
- This message may not come upwardly if your hard drive is smaller than 512mb.
4

Ensure the Windows 95 Boot Disk is in Drive A and press ↵ Enter .
5

Printing ↵ Enter to continue with the installation.
half dozen

Click Go along to go on with the installation.
seven
Take the license agreement.
- It's a skillful thought to read the agreement then you know what you're agreeing to.
8

Click Next
9
Select where on your hard drive you want Windows 95 to install and click Adjacent > .
- Normally it is all-time to choose where Windows recommends.
10
Select what kind of setup you would like and click Next >
- For this tutorial, 'Typical' was chosen.
eleven
Type in your product key and click Next >
- The production fundamental should take come with your Windows 95 setup disks.
12
Type in your proper noun and click Next > .
- It's not essential to put a visitor in
xiii
If yous have any of the hardware, click the check boxes which relate to your hardware and click Next > .
- For this tutorial, none of the check boxes were selected.
fourteen
Choose whether you want to install the nearly common components for Windows or to cull the components yourself and click Next >
- For this tutorial, 'Install the most common components' was selected.
15
Cull whether yous want to create a startup disk or not and click Next >
- The startup disk is a disk which tin can be inserted into your estimator should Windows fail to kick and can then repair or reinstall Windows.
- For this tutorial 'No' was selected.
16

Click Adjacent
17

Remove whatsoever disks from their drives east.g. floppy disks too as the installation disk and click Cease
eighteen

If you lot get confronted with this error, please see Method 4 ' Fixing "Windows protection fault"'
19

Click OK
20
Blazon in a Calculator name and a Workgroup and click Shut
- Figurer description is not required.
21

Reinsert the Windows 95 installation disk and click OK
22

Ensure your date and time settings are correct and then click Close .
23
Decide whether yous want to install a printer.
- If and so click Next > otherwise choose Cancel ( Cancel was chosen in this tutorial).
24

Remove any disks in your computer and click OK to restart your computer.
25

The Windows 95 installation is consummate. Relish.

Advert

1

Click Outset .
two

Click Shutdown
iii

Ensure the 'Shut down the computer?' choice is checked and then click Yes .

If you see this mistake, chances are your processor is too fast to run Windows 95. Fortunately, in that location is a cure.

one
2

Scroll down until you see FIX95CPU_V3_FINAL.Nix and click this hyperlink to begin the download.
iii

Click the little arrow side by side to FIX95CPU_V3_FINAL.Aught as shown in the picture and click Show in folder .
4
Right click the binder, and extract using the default Windows service by click Extract All... to a destination of your choosing.
- You can as well utilize a 3rd party plan such as seven-Zip.
5
Read the readme.
- This is then y'all can decide which file you demand to use:
- FIX95CPU.ISO and FIX95CPU.IMA is for use in a virtual machine
- FIX95CPU.ISO tin can be used to burn to a CD
- FIX95CPU.EXE is for writing to a floppy disk
half-dozen

Make sure the file you want to utilize is in the appropriate format (e.1000. a CD), insert it into your computer and boot the computer and printing any key to continue when confronted with the message shown in the moving-picture show.
7
Decide whether you want to read the readme by press Y for Yes or N for No.
- No was selected here as the readme is exactly the same as the one in the zip folder.
eight
When confronted with this message, press whatever cardinal to continue.
- This volition begin to prepare the processor issues.
nine
Printing whatever key to restart the computer and remove the 'CD' from the computer.
- If you don't remove the 'CD', it will begin an countless loop into this setup screen.

Add together New Question

Question

I can't continue afterward the commencement reboot, there is an error saying "Invalid system disk". All my files and subirectories are in 8.three format (?). What I am doing wrong (FAT16?).

Make sure the Windows disk is working. Y'all may take to remove the deejay(s).

Ask a Question

200 characters left

Include your email address to go a message when this question is answered.

Submit

Advert

Video

Due to the age of the operating system, it is unlikely to support whatever new programs.
The installation process may be different if you lot take upgraded to Windows 95 from a previous operating system.

Thanks for submitting a tip for review!

Advertising

Unless the installation says otherwise, do non plow off your computer nether any circumstances during installation. It could corrupt the process and require yous to restart the unabridged installation.
Since the operating organisation is unsupported, it is not advised that you get on the net as you could be more than at risk to viruses, etc.

Things Y'all'll Demand

Windows 95 installation disk and product key
Blank Floppy deejay (not required, unless you want a startup deejay)
Computer with the following specifications:
Intel 80386DX CPU that runs at whatsoever speed
RAM: 8MB (while 4MB is the official recommendation, Windows 95 may not kicking with that amount of RAM)
HDD: 55MB